Alter your property layout through carefully coordinated structural building work. Nodir personally reviews the proposed project and remains your principal point of contact throughout the agreed construction process.
Practical experience across building, renovation and property-improvement work.
The property, visible conditions and proposed work can be reviewed before the quotation is prepared.
One principal point of contact throughout the agreed building project.
Workmanship completed by EBS is supported by a one-year guarantee, subject to the agreed terms.
Removing a wall or forming a new opening can significantly change how an existing property is used, but the work must be planned around the building’s structure. Before construction begins, the wall’s role, the loads above and the support required must be established through appropriate professional assessment.
EBS carries out agreed structural building work using the available drawings, calculations and specifications. This may involve controlled removal, temporary support, installation of the specified structural components and making good the affected areas.
Nodir remains your principal point of contact, coordinating the agreed construction stages and discussing any conditions that become visible after opening-up work begins.
EBS does not itself determine whether a wall is load-bearing or produce structural calculations. The required assessment, drawings and calculations must be provided by an appropriately qualified structural professional. If EBS assists with coordinating any separate professional input, that responsibility must be confirmed in writing.
Depending on the property, the structural information provided and the agreed specification, EBS can coordinate the construction stages required to complete the proposed alteration.
The exact work included will depend on the property, structural design, access, service locations, required inspections and written quotation. Temporary works, structural components, bearings and connections must follow the project-specific drawings, calculations and specifications. Work arising from previously concealed conditions is not included unless added to the agreed scope.
Structural alterations must be planned around the existing construction, access and conditions within the affected area. These factors can influence the working method, programme and final quotation.
The property’s age, construction type and condition may affect how the specified alteration can be completed.
Electrical cables, plumbing, heating pipework or other services may be discovered when opening-up work begins.
Access routes, available working space and the safe movement of structural components must be considered before installation.
Where the property remains occupied, suitable protection, working boundaries and access arrangements should be agreed in advance.
An initial site visit helps EBS understand the visible conditions and practical construction requirements. It does not replace structural assessment, drawings, calculations, surveys or opening-up work that may be required before the final scope can be confirmed.
Each project is planned around the property, agreed scope and structural information provided. Nodir remains your principal point of contact throughout the construction process.
EBS reviews the proposed alteration, visible site conditions, access and available structural drawings, calculations and specifications.
The construction scope, quotation and anticipated sequence are agreed, with required technical information and third-party responsibilities identified before work begins.
The affected area is prepared before the specified temporary support, controlled removal and permanent structural components are completed in the required sequence.
Required inspection stages are accommodated, followed by the agreed reinstatement, making good and finishing work.
The programme depends on the required structural information, site conditions, material availability and any necessary third-party inspections or approvals. EBS cannot guarantee the timing or outcome of decisions made by structural professionals, Building Control or other external parties.
Structural alterations can require professional design information, Building Regulations approval and, in some circumstances, Party Wall procedures. These responsibilities should be established before construction starts.
An appropriately qualified structural professional should assess the proposed alteration and provide the necessary drawings, calculations and support details.
Removing a load-bearing wall normally requires Building Regulations approval. Other structural alterations may also require approval, and the property owner must ensure that the correct application and required inspections are arranged.
The Party Wall etc. Act may apply where work affects a shared wall or party structure. Where applicable, the building owner is responsible for following the required notice and any necessary agreement or dispute-resolution procedures before work starts.
EBS carries out the agreed building work using the project-specific drawings, calculations and specifications provided, while accommodating required inspection stages. Any additional coordination responsibility must be confirmed in writing.
EBS does not itself provide structural engineering, Building Control approval or Party Wall surveying. If EBS assists with coordinating any separate professional service, that responsibility must be expressly confirmed in writing. Property owners should obtain independent professional advice where they are unsure which requirements apply.
EBS completed the agreed structural alteration work at this property using the project-specific drawings, calculations and specifications provided. The work involved [confirmed scope], followed by [confirmed making-good or finishing work].
Eco Building Solutions is rated 9.95/10 from 173 Checkatrade reviews and has been a Checkatrade member since June 2018.
View Verified Customer ReviewsThis rating reflects customer feedback across EBS’s overall range of building, renovation and maintenance services and is not specific to structural-alteration work.
A wall’s structural role should be established by an appropriately qualified structural professional. EBS does not determine whether a wall is load-bearing without the required professional assessment and technical information.
Load-bearing wall removal normally requires project-specific structural information showing the required support, bearings and installation details. The exact information needed should be confirmed by the appointed structural professional.
Removing a load-bearing wall normally requires Building Regulations approval. Other structural alterations may also require approval, so the correct application and inspection requirements should be confirmed before work starts.
Timescales depend on the alteration, structural design, access, component availability, inspection stages and making-good requirements. EBS will provide an anticipated programme once the agreed scope has been established.
This depends on the location and extent of the alteration, the required temporary support and how the work affects access and essential services. Practical arrangements should be discussed before construction begins.
EBS will discuss the condition discovered and explain how it may affect the agreed work. Additional investigation, revised technical information or a variation to the quotation may be required before work continues.
Tell us about the alteration you are considering and any structural drawings or calculations already available. We can arrange a free site visit to discuss the visible conditions, construction requirements and next steps.
Based in South Croydon, EBS provides structural alteration and load-bearing wall removal services across Croydon and surrounding areas, including Purley, Coulsdon, Sutton, Bromley and Epsom. View all the areas we cover, or contact us to confirm availability for your property.
